Solvent seal what it is. The coal solvent.
S2 Series - High-gloss solvent-based screen ink specially designed for printing on pressure-sensitive coated vinyls and polyesters used for the production of stickers.
Available packaging: .
ADE Series Download instruction
ADE Series- A series of screen inks designed for high-quality printing with excellent adhesion to metal, glass and other “difficult” surfaces. The ADE series is ideal for labeling printed circuit boards, as well as where increased resistance to solvents, chemicals and abrasion is required.
Destructive method: by measuring the thickness of a dry film using a quadrant comparator. The method is used in cases where a film-forming product is applied to a rigid and flat surface, the measurement accuracy is ± 2.5 microns. Non-destructive method for determining dry film when applying a film to a metal or magnetic substrate. The definition basically has a change in the magnetic flux generated between the magnet and the magnetic object depending on the non-magnetic space between them, in this case, depending on the thickness of the non-magnetic film of paint between the magnetic part of the measuring instrument and magnetic film carrier.
ADE is a two-component ink that mixes with the catalyst immediately before printing. The paint has a high gloss surface. Not suitable for external use.
Available packaging: .
Vf series Download instruction
Paint series Vf It has excellent adhesion to rigid and flexible vinyls and vinyl coated materials. Inks have excellent printing properties, hiding power, dry quickly. Designed for indoor use.
Determination of film flexibility Film flexibility is its property that it can be bent without sacrificing life. The definition of flexibility consists in bending the support on which the film is applied around various mandrels, the diameter of which is reduced and is expressed by a number representing the diameter in mm of a thinner mandrel, on which the curved film is not damaged. In recent years, paint, paint and the finer industry have been one of the most efficient areas of activity in Romania, attracting significant investments and reaching a technological level very close to companies in the European Community.
All paints except VF111 Black are suitable for heat sealing. For heat sealing, you can use VF121 Non Arcing Black.
Available packaging: .
SCF Series Download instruction
SCF - Erasable, screen-based solvent inks are specially designed for printing lottery tickets and games, which are usually distributed through a retail network. The paint creates a fairly covering layer that hides the “prize” until the moment when the paint is removed with a fingernail or a coin.
This project analyzes aspects of consumer behavior related to the acquisition and use of paints and varnishes for the interior of a residential building. The most dynamic development in the market of paints and varnishes in Romania was recorded in the segment of decorative products, which includes film production and the raw materials segment, which are synthetic resins that are necessary both in the production process and for other potential beneficiaries. The launch of new products and brands is the result of the sustainable work of research and development departments in collaboration with marketing departments.
The base must first be coated with a UV curable screen transparent base PSLC 294 UV Litho Clear, which provides good adhesion and abrasion to SCF inks.
Available packaging: .
DA Series Download instruction
DA Series - These are two-component polymerizable paints with excellent plasticity and resistant to washing, dry cleaning and ironing. DA Series is a high-hardening, flexible and flexible ink for printing and flocking on most synthetic and natural fabrics, including water-repellent nylon and other impregnated synthetic fabrics. (When printing on water-repellent nylon, a preliminary test is recommended).
Paints are products that attract domestic and industrial consumers. The trend of the last period is the orientation of companies producing or importing domestic consumers, which are a segment of the market with growing consumer potential, but competition is especially strong in this segment. The advantage of a more thorough approach to this market segment is a safer and much faster recovery of requirements than in the segment of industrial consumers. The film market is characterized by concentration, stability and intense competition.
DA Series must be mixed with the DA176 Catalyst before printing.
Available packaging: .
PA Series Poly-All Download instruction
Paint series PA Series Poly-All Designed specifically for screen printing on untreated polypropylene. The unique paint formula makes operation such as pre-activation of the material unnecessary. The RA series has satisfactory adhesion to most polypropylene substrates. However, as the formulas for the manufacture of substrates change over time, users should always conduct preliminary tests for compatibility of paints and materials before printing. PA Series paint has a semi-gloss surface. Completely dried, the paint of the RA series has good flexibility and durability. Ink of this series is suitable for pad printing on some substrates.
The paint market began to grow gradually. Currently, there are several large domestic and well-known importers. The paint market is not fragmented and has major brands for sales polarization. In turn, manufacturers will offer more sophisticated products to add to the characteristics of other categories of paints. Market Segmentation Organizations operating in consumer and commercial goods markets cannot reach all customers in these markets, or at least not all customers.
Available packaging: .
Download instruction
Versacon Classic V5000 Series - a series of 2-component solvent-based screen inks designed for printing on plastic containers made of activated polyethylene and polypropylene.
The V5000 Series provides excellent resistance to a wide range of solvents, chemicals, and products that are typically packaged in similar containers.
Buyers are very numerous, very scattered and very diverse in terms of their needs and the methods that they use when buying a product. Companies vary significantly depending on their ability to serve different market segments. Instead of trying to compete in the whole market, and sometimes against more genuine competitors, each firm must identify the market that it can best serve. Since buyers have unique needs and desires, each buyer potentially represents a separate market.
Available packaging:.
9600 Series Download instruction
9600 Series inks designed for printing on non-activated polyester films. After drying, the films show good gloss and flexibility with the exception of the 9652 Super Opaque White, which has a matte but flexible surface. The 9600 series can be used with the NB72 catalyst or NB80 adhesion promoter to improve adhesion to a wide range of substrates, including polyester, some types of rubber, polycarbonate, melamine plastics, leather and some types of processed and unprocessed metals.
In the ideal case, the applicant can develop a marketing program for each buyer. Market segmentation is based on criteria: socio-demographic, psychographic, geographical, economic and behavioral. According to statistics, urban residents are the predominant consumers of paints. The social and professional category, which mainly relates to the product, is traders. The highest percentage of non-food consumers among respondents aged 15–25 years and the lowest among people over 35 years old.
In conclusion, the segment of consumers with the greatest potential for the market of paints and varnishes is highly active productive personnel with particular sensitivity to original and branded products under the age of 35 in urban areas. Department of wooden products Department of industrial and marine paints It has already been demonstrated that the future of modern dyes is based on the use of water-based paints. Within two years, most European countries have adopted water-based paints. According to data presented at international conferences presented by the International Research Institute, the market for these paints is growing more and more in Europe, where environmental legislation is becoming more restrictive.
When printing with the 9600 series of polycarbonate to carry out IMD work, for best results, we recommend adding NB72 catalyst in a proportion of up to 5% by weight.
Available packaging: .
8400 Series Download instruction
8400 Series CVIM Screen Ink - A series of screen inks developed in accordance with the requirements for decorating technology in the mold. 8400 Series paints possess the plasticity necessary for molding and subsequent trimming, resistance to washing off during the casting process, and adhesion to polycarbonate melt. Printing over 8400 of the 8449 Tie-Coat coating enhances adhesion to other melts such as ABS, PMMA and PVC. Inks 8400 Series are designed for printing on the inner layer on polycarbonate and prepared polyester films, for their subsequent molding and use for decoration in the mold (IMD technology).
Thus, sales figures are growing, and the UK is in second place with 23%, followed by Spain, Germany, Italy and France. According to the same estimates, if today the average use of water-based paints is 15%, in the next 10 years it will grow to more than 90%. With new laws to reduce the amount of solvent emitted into the atmosphere, water-based paints have come in recent months to 140,000 liters, sold and used by more than a thousand artists. These paints are a 63-base system that is easy to mix and does not need to add additives, catalysts, solvents, etc. To provide sufficient tap water.
The addition of a NB72 catalyst or an adhesion promoter NB80 is a prerequisite for the application of paints in IMD technology.
Available packaging: .
Color vue 8800 Download instruction
Color vue 8800 “The Color Vue 8800 Series is designed for the production of dashboards, membrane keypads, and decoration in areas where transparent, optically pure, and opaque colors are required. The 8800 Series is compatible with most acrylic-based transfer adhesives.
It is a very concentrated formula and does not precipitate with a very high coating. Compared to solvents, it has a coating power that reduces material consumption by 40%. Paint can be used both for minor repairs and for full painting. Using paints and varnishes, thin films are formed on the surface of the protected objects, which have a double role: protection and creating a pleasant appearance. Natural resins come from the secrets of animals or plants. Pigments are insoluble colored substances.
With binders and solvents, they form dispersions, the fineness of which depends on the degree of pigment milling. Their nature and origin can be: - natural inorganic pigments - artificial inorganic pigments - metal pigments - organic or synthetic organic pigments. They give the color of the painting material. Fillers can be: - by their origin - natural or artificial fillers - these are solid, inactive substances and are used in the form of fine powders.
Available packaging: .
PX Series Download instruction
Paint series PX It is a pigmented adhesive for flocking on a wide range of natural textile materials.
Excellent hiding power and high viscosity make it easy to reach a thick adhesive layer. PX Series inks are ideal for use without high-temperature drying.
Solvents Liquids of organic nature are usually very volatile. They dissolve the film-forming substance, then the binder, after applying it to any surface of the dye product, evaporates to form a protective film. Plasticizers are non-volatile organic products that dissolve or gel film-forming substances. Plasticizers, unlike solvents, remain in the film after formation. The main products of varnish are solutions of cellulose derivatives, natural or synthetic resins in organic solvents with or without the addition of vegetable oils.
Available packaging: .
Solvent is a solvent that is produced by evaporation of petroleum products. Today it is produced in two forms:
- “Oil”, GOST 10214-78;
- "Coal" GOST 1928-79.
This class of solvents falls under the number of volatile materials.
Paints are coating products used as intermediate or final coatings in paint systems, forming shiny, adhesive and durable protective and decorative films. As a rule, latex paint does not adhere well to very glossy surfaces, since the water content causes rusting of metal surfaces and retains moisture on wooden surfaces. Alkyd resin paint is used on surfaces on which a primer is applied. For greater resistance, it can be applied in 2 layers, 4-6 hours after the first application.
The main distinguishing feature of Solvents is a high degree of dissolution of a wide variety of paints and varnishes. Additionally, it can be noted that Solvents, after application to the treatment zone, have the ability to “disappear” very quickly, also taking away all the smells along with them.
What is Solvent for?
Solvent for paints and varnishes Solvent, both petroleum and stone (Nefras A 130/150) is widely used in construction and automotive industries, when there is a problem with the dilution of alkyds, enamels and other materials to their "working" state. The most common substances for which the solvent is used are: epoxyesters, organosilicon, phenols, polyacrylates, melamine alkides, alkyd-urethanes, alkylo-styrenes and several other less common materials.
Rubber paint is an expensive paint and has a strong odor, but is waterproof and durable and is an excellent concrete tread. It can be applied directly to intact masonry. There are also granule-free textured paints and they are applied to the surface and textured with special tools. Textured paints are based on both latex and alkyd resins. Latex formulations can be used directly on the surface as they mask imperfections. Paint “Without a drop” is more expensive than any ordinary paint, “without a drop” is ideal for the ceiling, because it is so thin that it does not flow from the brush or brush.
How to apply the solvent
In the construction industry, solvent is used to create the necessary viscosity for paints and varnishes. For its proper use, it is necessary to add a little bit of solvent to the material and mix thoroughly until a soft consistency is formed. Sometimes oil solvent is used for degreasing. To do this, all that is needed is to simply wet a rag with an oil solvent and wipe the treatment area.
Cover any surface in one layer, but since it is very dense, it does not stretch very well. Single-layer paint - has an additional pigment to improve the power of the coating, it is really used in one layer and is slightly more expensive than the version of latex or alkyd resin. Large format digital printing is one of the most popular forms of advertising on the market, which is becoming more and more popular every year. This affects the versatility of digital printing, reducing its cost and the growing variety of print media.
Specially configured printing machines can be printed directly on plastic plates, ceramics, stone, wood, and even directly on products such as soap bundles. We offer not only the press, but also its gluing. Digital printing. Digital printing is a process in which the end result of printing is obtained directly from a file, bypassing labor-intensive and non-automatic operations. Part of the print run of the digital printing system allows you to make variable information for each copy.
Safety precautions
Like any solvent liquid, Solvent is a flammable liquid and has a very specific odor. The main rule at the beginning of work with the liquid is the presence of a protective suit, mask, respirator and gloves. The thing is that if this liquid accidentally gets on the skin (not to mention the eyes), it is capable of causing irritation at best, and burns if abused.
The benefits of digital printing. The most important thing: speed and speed work efficiently with small runs, starting with copy 1, in order to quickly execute orders, because they require several hours of a full cycle of work, from scanning a document to delivering the finished product. How do they differ from eco-solvent paints?
These are water-based pigments using an artificial polymer solvent, also known as latex. A special polymer requires a different printing technology: the printer starts to heat up immediately after printing. The result of heating is that the water evaporates and the polymer coagulates on the print medium. Latex paint consists of five basic elements. The solid ink base is polymer particles and pigment particles. The base of liquid ink consists of: 70% water, 29% solvent and 1% various additives, which makes printing extremely high.
Important ! Do not forget to ventilate the working room, and even better, carry out all repair work in the open air, as inhaling large amounts of solvent vapor is extremely hazardous to health.
If it so happened that Solvent accidentally came to your skin area, it should be washed immediately in warm soapy water. As for the possible ignition of the liquid, if this happened - it should be extinguished exclusively with the help of fire foam, sand or carbon dioxide, in no case use water to extinguish.
Characteristics of solvents
Solvent Coal
- Scope of use: this solvent is designed for use in cases where it is necessary to dissolve or dilute paints and varnishes such as varnishes, paints, enamels, washing liquids in the automotive industry, etc.
- Composition: aromatic hydrocarbons that are obtained during the processing and purification of fractional crude benzene and pyrolysis resin.
- Color palette: exists only in a faint yellow color or in a completely transparent state.
- Quality mark: density at 20 degrees Celsius, kilogram per cubic meter, should not be less than 864; "Volatilization" on xylene, should not be more than 1.2; mass fraction of sulfur, in percent, does not exceed - 0.005; mass fraction of phenols, in percent, less than 0.0022; water extract reaction is neutral; the minimum necessary temperature for boiling is 125 degrees Celsius.
- Packing: barrels with a volume of 220l (185 kilograms).
- Manufacturers: both domestic and foreign.
- Recommended shelf life: 1 year from date of manufacture.
Important ! After drying, this solvent leaves a pleasant shine on the paint. When working with this solvent, always wear a mask and gloves, make the work area ventilated and do not allow the solvent to get into your eyes.
Solvent Oil
- Scope of use: this chemical material is used in cases where it is necessary to dissolve substances based on oil, bitumen, rubber, oligomer, petroleum resins, polyether amide and polyetherimide. Additionally, for melamine-alkyd lacquer materials and printing.
- Composition: aroma-hydrocarbons with a low proportion of naphthene, cyclic hydrocarbon paraffin.
- Color palette: exists only in a fully transparent state.
- Quality mark: density at 20 degrees Celsius, grams per cubic meter, should not be less than 0.861; xylene volatility should not exceed - 1.21; mass fraction of sulfur, in percent, should not exceed - 0,021; the mass fraction of sulfonated materials, in percent, should not be less - 98.9; water extract reaction is neutral; the minimum necessary temperature for boiling is 150 degrees Celsius.
- Packing: barrels of 9 liters (8 kg), as well as canisters of 218 liters (172 kilograms).
- Manufacturers: domestic and foreign.
- Recommended shelf life: 1 year from production dates.
What to choose solvent or white spirit
Let’s first understand what the phrase “White Spirit” means? It's no secret that in the literal translation from English we get the phrase “white spirit” (where spirit means spirit and white means white, transparent)
If you connect a fantasy, then you can come to some strange spiritual transformations. But everything is much more commonplace.
White Spirit and Solvent, both chemicals obtained during the distillation of oil. Under the influence of high temperature conditions, oil overheats and forms a pair of various hydrocarbons. The resulting pairs are divided into classes, which differ in their temperature boiling range. It is because of the different boiling points that various chemicals are obtained.
As for the boiling point itself - it means that at a certain temperature, particles of oil evaporation begin to convert to a solvent. Actually, this is the fundamental difference between White-spirit and Solvent, since “spirit” begins to form at a lower temperature than the second class of solvents.
For clarity, we give an example for such an individual substance as water. It will boil at a temperature of 100 degrees Celsius, the bottom line is that only under this condition will it begin to evaporate. But the difference between solvents and water is that water is a homogeneous substance, and solvents are a kind of mixture of different components. From this it logically turns out that all their components will also have different boiling points, which, accordingly, forces two different solvents to form separately from each other.
Concluding, we can say that Solvent, as a mixture of simpler components, begins to transition from a liquid to a gaseous state at relatively low temperatures, which means it dries faster. It is this quality of the solvent that gives it an advantage over quick-drying paints and varnishes, and due to the low content of the oil substance (which is retained during the formation of the solvent), it makes the surface to be glossy.
Now, regarding the "White-spirit." Its drying time is longer. its boiling point is 200 degrees Celsius. During production, it retains a greater amount of oil components than in Solvent. This quality makes it unique when creating a matte shade on the treated surface. We can say that the white spirit solvent is more rational to use only for metal surfaces, where it is necessary to thoroughly clean the surface.
For comparison, drop one drop of two solvents onto a piece of paper, and you will certainly see which is better. But it all boils down not to “who is cooler”, but to what purpose you need a solvent for. If you need fast drying ability along with a glossy shade, then Solvent is the right choice, but if you want to create an additional layer of protection and dullness for the surface, then the use of White Spirit is undeniable here. The main thing is to decide on the goals for which you need a solvent.
- Protection of wooden structures from rotting, moisture, fire